After the launch of the Copy Patek Philippe new watch, it received a lot of attention. But in its new year’s work, there is a very important detail that can easily be ignored. It carried out a major technical upgrade on the main movement this year and introduced the upgraded model 26-330 caliber of the 324 movements (representing 26.6 mm diameter, 3.3 mm thick). This means that it is likely to have a major replacement of the main movement. In addition, it used to have a movement numbered 330. I think this is also the reason for using the number 26-330, plus a 26 to distinguish it.
What kind of movement is Copy Patek Philippe new?
Its new movement (5212A weekly version) measures 27 mm, has a thickness of 4.82 mm (with a weekly module) and is powered for 45 hours. The new technology used is as follows:
First of all, the most intuitive, we can see that the automatic movement of the new movement has changed. Its new automatic toroidal shape is significantly different from the 324 movements. The center position of the automatic gyro has a ruby bearing, which is not available in the 324 calibers. The new movement is also unidirectional, but the new movement uses a new clutch gear (in short, there is an improvement on the automatic tourbillon). The automatic gyro is in the winding direction, normally winding, in the idling direction, the spring is Automatic tow separation. At the same time, when manually winding, the manual winding train is also separated from the automatic winding mechanism. I don’t know if you have encountered this kind of situation.
When you manually wind up, the automatic gyro sometimes rotates.
I think 26-330 is separated from the automatic winding mechanism when manually winding, just to prevent this phenomenon. Improve the efficiency and longevity of the automatic winding.
Second, the new movement further modifies the shape of the movement gear. An important technical detail on the Copy Patek Philippe movement is the shape of the gear teeth. Since the mechanical watch is essentially a 4-stage acceleration system, it accelerates step by step from the spring, three-wheel, four-wheel, and escape wheel (one gear rotates faster than one year), so in this step-by-step acceleration process, The torque is greatly reduced step by step, which causes the swing of the watch balance to fluctuate and become unstable.
Therefore, from this principle, the mechanical watch is theoretically inaccurate. In the new movement, Patek Philippe Replica uses the LIGA (photoelectric etch) technology to create a new three-wheel nickel-phosphorus alloy. The new three-wheel tooth shape is very special and the teeth are open. The densely arranged teeth are much like metal brushes. My personal feeling is that each tooth is a flexible small reed with an opening at the end. The new design of the three wheels, the biggest role is to transmit power to the four wheels (second wheel), can maintain power stability, improve power efficiency, reduce torque loss.
Third, the new Fake Watches has a stop-second function.
We know that the old model has no stop-second function. To be honest, I have always wondered why it didn’t add a stop to the old movement. Not stopping seconds means that when you adjust the watch, it is difficult to adjust the watch to the second. Finally, on the new generation of movement, there is a stop-second function. For the stop-and-go that can’t be stopped all the year round, this change is still quite significant.